Recaro Profi SPG XL Bucket Seat (FIA) - BLK Velour

DESCRIPTION

• Premium Hold in All Locations

• Ideal for offroad and rally use – the shells of the RECARO Profi SPG (glass fiber reinforced polymer) have been proven many times over and offer superb lateral hold on the race track and offroad. The XL variant of the seat is wider and higher, with larger belt slots.

SPECIFICATIONS

• Features:
• Suitable for 4-, 5- or 6-point belts
• Flame-retardant upholstery
• Friction grip surface around the shoulders 
• Paddable lumbar support
• Seat shell made of glass fiber reinforced plastic (GFRP) 
• XL: larger belt slots
• XL: seat shell 35 mm wider and 50 mm higher

DIMENSIONS 

Refer to last image

• Overall dimensions:
  
• A: Seat depth
  
• B: Seat height
  
• C: Shell outer measurement at shoulder
  
• D: Shell outer measurement at seat bottom
  
• E: Subframe width
  
• F: Tilt at mounting level
  
• G: Width between mounting bolts

• Comfort dimensions:
  
• H: Seat width at bottom
  
• I: Height of shoulder support
  
• J: Seat depth
  
• K: Seat height

• Belt slot:
• L: Height of belt slot
  
• M: Center belt slot

• *XL: seat shell 35 mm wider and 50 mm higher*

• Weight without brackets: 10kg

WHAT'S INCLUDED?

• Recaro Profi SPG XL Bucket Seat (FIA) - BLK Velour
• Recaro Steel Side Brackets

INSTALLATION GUIDE

• Without Seat Sliders

1. Install the 22’ profiles on the chassis. Tighten the bolts holding the corner gussets to the 22’ profile, but leave the bolts attaching the 22’ profile to the chassis loose.
2. Install the seat brackets on the 22’ profile. Make sure the inside edge of the seat bracket is flush with the inside edge of the 22’ profile, then tighten the bolts holding the seat brackets on the 22’ profile.
3. Install the seat in the brackets, be careful not to scratch the seat while doing this. If necessary, slide the 22’ profile further apart.
4. Tighten the seat brackets to the seat in the desired position. Make sure you are using the same mounting holes on each side.
5. Make sure the space between the 22’ profiles and the base is equal on each side to center the seat with the chassis. It is okay for the 22’ profiles not to be parallel with each other, as long as the seat is centered and straight.
6. Your rig is ready to go!

• With Seat Sliders

1. Install the 22’ profiles on the chassis. Tighten the bolts holding the corner gussets to the 22’ profile, but leave the bolts attaching the 22’ profile to the chassis loose.
2. Install the seat sliders on the seat brackets. Make sure the inside edge of the seat slider is flush with inside edge of the seat bracket.
3. Install the seat slider and seat bracket assembly on the seat while it is off the chassis. Make sure you are using the same mounting holes on each side. Be careful not to scratch the seat while doing this.
4. Make sure the two seat sliders are at the same locking position.
5. Bend the U handle bar for the seat sliders to make it wider or narrower depending on fitment.
6. Install the U handle bar while being careful not to hurt your fingers.
7. Install the seat assembly on the 22’ profiles.
8. Tighten both front or rear bolts holding the sliders on the 22’ profile.
9. Slide seat forwards or backwards to have access to the other bolts. Tighten them.
10. Center the seat with the chassis by moving the whole 22’ profile and seat assembly. Be careful not to scratch the profiles.
11. Tighten the corner gusset bolts that were left loose at the beginning.
12. Your rig is ready to go!

SHIPPING AND LEAD TIME

• FREE SHIPPING to all of the Continental U.S. and Canada (excluding Yukon, Northwest Territories & Nunavut). 
• IMPORT DUTIES COVERED for U.S.-based customers.
• We ship from Montreal in Canada
• Our typical lead time before shipping out orders is 5 to 7 business days. This varies depending on the purchased items and our shipping queue.
  
• Once the items have shipped, transit time typically takes between 2 and 4 business days
• Please note that all large items, such as our SimRacing Chassis, Monitor Stands and Racing Seats, might not arrive on the same day as other parts of your order. Because of their weight and size, these boxes get sorted differently at our shipping partner's logistics hub.

RETURN POLICY

If the seat you ordered is too tight and doesn't fit properly, we can offer a store credit or a full refund, but you will have to pay return shipping to our workshop in Montreal, Canada. We highly advise that you pay close attention to our specifications and measurements before placing your order.